 |
VFP 愛用者社區 本討論區為 Visual Foxpro 愛用者經驗交流的地方, 請多多利用"搜尋"的功能, 先查看看有無前例可循, 如果還有不懂的再發問. 部份主題有附加檔案, 須先註冊成為社區居民才可以下載.
|
上一篇主題 :: 下一篇主題 |
發表人 |
內容 |
netken
註冊時間: 2004-04-26 文章: 1
第 1 樓
|
發表於: 星期一 四月 26, 2004 8:21 pm 文章主題: VFP3.0 running on winxp , show insufficent memory . help ? |
|
|
VFP3.0 running on winxp , show insufficent memory . help ? |
|
回頂端 |
|
 |
Ruey
註冊時間: 2003-03-12 文章: 1698 來自: tunglo
第 2 樓
|
發表於: 星期二 四月 27, 2004 2:26 am 文章主題: |
|
|
我建議你使用新版. _________________ #############################
快樂媽咪系列幸福宅配,喝十全雞湯~原來幸福那麼簡單!!
學會VFP使用者社區的搜尋,Code才會更有趣~
############################# |
|
回頂端 |
|
 |
syntech
註冊時間: 2003-05-16 文章: 4249 來自: Taipei,Taiwan
第 3 樓
|
發表於: 星期二 四月 27, 2004 8:54 am 文章主題: |
|
|
Knowledge Base
FIX: Insufficient Memory on a Computer That Has 512 MB of RAMPSS ID Number: 137809
Article Last Modified on 3/27/2001
--------------------------------------------------------------------------------
The information in this article applies to:
Microsoft Visual FoxPro for Windows 3.0
--------------------------------------------------------------------------------
This article was previously published under Q137809
SYMPTOMS
The error "Insufficient Memory" displays when you attempt to start a Visual FoxPro 3.0 session. The computer has 512 megabytes (MB) of RAM, or more, and should have enough memory for Visual FoxPro to start.
NOTE: In Visual FoxPro 3.0, the insufficient memory message does not occur on computers with less than 512 MB of RAM.
NOTE: In Visual FoxPro 3.0b, the insufficient memory message does not occur on computers with less than 768 MB of RAM.
RESOLUTION
If you are using Microsoft Windows NT, you can limit the amount of memory used by the operating system. You can create a boot (in the Boot.ini file) that uses a special configuration for Visual FoxPro. To limit the amount of memory that Windows NT uses, use the MaxMem switch. Using a trial and error method, determine the maximum amount of memory you can use before you receive the "Insufficient Memory" error when launching Visual FoxPro.
For more information about multi-boot and the MaxMem switch, please see the Windows NT documentation.
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This bug was corrected in Visual FoxPro 5.0a for Windows.
MORE INFORMATION
Steps to Reproduce Problem
Install Visual FoxPro on a computer that has 512 megabytes of RAM.
Start Visual FoxPro. The "Insufficient memory" error appears, and Visual FoxPro cannot start.
Additional query words: crash
Keywords: kbbug kbDSupport kbenv kbvfp300bFIX KB137809
Technology: kbAudDeveloper kbVFP300 kbVFPsearch
--------------------------------------------------------------------------------
Send feedback to Microsoft
© 2004 Microsoft Corporation. All rights reserved. _________________ 如果公司有下列困擾:
1. 找不到便宜,快速,簡易的 生產排程軟體
2. 不知道如何快速排定 採購計劃
3. 成本抓不準,自己算比軟體算有用
4. 想學習系統規劃,想找系統架構的顧問
請聯絡我們,也許我們幫得上忙 |
|
回頂端 |
|
 |
syntech
註冊時間: 2003-05-16 文章: 4249 來自: Taipei,Taiwan
第 4 樓
|
發表於: 星期二 四月 27, 2004 8:57 am 文章主題: |
|
|
3.0b 在 512 MB 的確是沒事的......
不過,3.0 我是覺得 功能最少,但是是滿穩定的版本,
6.0 就差多了 _________________ 如果公司有下列困擾:
1. 找不到便宜,快速,簡易的 生產排程軟體
2. 不知道如何快速排定 採購計劃
3. 成本抓不準,自己算比軟體算有用
4. 想學習系統規劃,想找系統架構的顧問
請聯絡我們,也許我們幫得上忙 |
|
回頂端 |
|
 |
|
|
您 無法 在這個版面發表文章 您 無法 在這個版面回覆文章 您 無法 在這個版面編輯文章 您 無法 在這個版面刪除文章 您 無法 在這個版面進行投票 您 無法 在這個版面附加檔案 您 無法 在這個版面下載檔案
|
|